Practical & Elegant Hose Pots
This Durable Resin Garden Hose Pot combines practicality with elegance by keeping hoses neatly coiled out of sight in this attractive hosepot. Side hose-entry allows hose to remain attached to faucet when stored. Use with hose hole plug to make an attractive planter. A water drainage channel on container bottom assures proper drainage. Holds up to 75′ of hose. Hose not included.

VIEW MORE HOSE POTS ON THE RIGHT >>
<< Browse our Full Line of Wateri (more…)

Handmade Hose Pot Item #DGD441 Product Features Handsome hiding spot for up to 150 feet of unruly garden hose Handcrafted using Old World techniques and modern innovations Raised interior base guides the hose in the container Multiple drainage holes eliminate excess water Ample side hole allows easy connection to an outdoor faucet Finish: Sage Dimensions: 10H x 18″W Materials: Sage-colored steel

(more…)

This decorative hose holder will conceal unsightly garden hoses, keeping your lawn tidy and your garden hose free from tangles and kinks. The copper hose pot features a convenient center-stem hose winder that makes storing and extracting your hose easier. Crimps in your hose can cause premature wear and lots of hassle, but this coil hose holder eliminates both problems.  The water hose holder is made of solid steel and plated with an attractive, durable coating in copper colo (more…)

CobraCo hose holders are a brilliant solution for obscuring hoses in a decorative fashion. The hose holders hold up to 150 ft. of hose, with convenient drain holes situated at the base of the holder. Each holder has a fresh copper finish treated with green patina. The CobraCo Embossed Leaf Copper Hose Holder decoratively holds a garden hose up to 150 feet in length. Drain holes are situated at the base of the holder to prevent leftover water from making a mess. This hose holder (more…)

abnehmen mit FitLine XXS

Set of 3 Decorative Garden Hose Pots Item #44132-2 Hose pots have decorative aged antique look and are water tight Pots have ample side holes allowing for easy connection to a faucet Dimensions of each pot: Small: 10″H x 17.75″W x 17″D Large: 12″H x 20.5″W x 19.75″D Material(s): copper/iron

(more…)

WP Robot WordPress Autoposter

Side hose-entry allows hose to remain attached to faucet when stored. Use with hose hole plug to make an attractive planter. A water drainage channel on container bottom assures proper drainage. Terra Cotta color.

(more…)

Whimsical flowers make this metal hose pot and matching watering can a cheerful pair. The hammered copper finish gives it character. Hose pot has a center post to keep hose neatly coiled and drainage holes to keep it dry. Sprinkler head on the watering can gives even your most delicate plants a gentle shower.

(more…)

Do you have difficulty coiling and uncoiling your garden hose? This sleek, slim hose holder can help you do it with ease. This product holds a garden hose up to 150 feet in length. Drain holes are on the bottom so leftover water from a hose won’t fill up this holder. Its powder-coated copper finish with green patina will attract lots of attention. Place it on your deck or patio or even in your garden for decoration and ease of use.

(more…)

But, once the dog days of summer hit, and the weekly rain showers do not make their way to your new crops, they might begin to look a little worn as they begin to dry out and become parched in the hot sun. Water becomes more important and your responsibility to keep them from dying is more apparent.

Large rain buckets or rain-barrels are easily setup to collect life giving rain water during those times when storms pass through. Harvesting rain is something that every person should be thinking of as they begin their quest to add gardens to their backyards.

Usually the basic question on many minds is “How do I get started and how hard is it to do?” Having a strategy and plan are crucial in creating a sustainable collection, storage and distribution system for your home. These systems can be very elaborate and expensive, but in most cases, keeping it simple is preferable as funds are usually limited.

The 3 basic areas of a rain harvesting system are: Collection, Storage and Distribution. Rain buckets are the large containers that can be designed specifically for the purpose of collecting the rain and can be as simple as vinyl or plastic trash cans. When located near downspouts, these rain buckets can collect water that land on the roof. Since the roof has the largest surface area, it is common practice to place your rain bucket near the house or shed where the downspouts channel the water from the house.

Once you know where you want to locate the rain bucket, the next question often asked is “How do I get the rain into the bucket?” Typically, this is done by cutting off part of the down spout so that the end sits a bit higher than the bucket itself. Cut a hole in the lid and cover the opening with a very thin wire mesh. This mesh will allow the rainwater to enter, but prevent insects such as mosquitoes from nesting in the water.

Cut an 8-10 inch piece of the 1″ PVC pipe. Apply PVC Cement liberally around one end and the female to male hose bib adapter. Twist slightly and let set for about 10 minutes. While this is setting, take your electric drill with a 1″ spade bit and drill a hole about 6 inches from the bottom of the bucket. Insert the 1″ by 8″ PVC pipe with a hose thread exposed. Seal the hole with PVC cement and let set for about 10 minutes to prevent leakage. Once set, you’ll be able to hook up a standard garden hose to the exposed PVC Pipe. The pressure from the amount of water contained inside the rain bucket will allow you to water your plants without much difficulty.

In summary, a large Rain Bucket is an easy way to begin conserving water to provide your garden with essential life giving fluid whenever needed. Since the water had been collected and stored from the previous rainstorms, you will not have to worry about the bill.

A gallon storage container can be used to store just about anything. From a containment drum for capturing rain from your rooftop, to storing food. Multi-gallon containers are versatile for any job.

Author: Robert Owens
Article Source: EzineArticles.com

This stylish hose holder is embossed with the image of a bird on its side. The picture here simply doesn’t do it justice, click on the image to see it in its larger format. With a copper finish over its steel body, it’s built to last a long time in the outdoors, while still looking charming. It would be a perfect outdoor accessory for those looking to hide their hoses. The manufacturing company claims it can hold up to 150 feet of hose, and my own testing shows it can hold at least 100 feet of hose comfortably. The holder has a round center core in which you wrap the hose, I wouldn’t want to try and wrap 150 feet though, as any used hose would need quite a bit of crimping to get it to fit. The bottom of the holder contains drain holes which allow any residue water in the hose to escape out of the pot. The matching lid will help keep debris and rain out of the hose holder.

Preparing for Winter: I do suggest that you bring the entire hose holder and hose in during the freezing months. Leaving a hose outside, even while in a pot such as this, will quickly wear it out. The pot itself weighs about 10 lbs. With 100 ft of AquaPure Neverkink Garden Hose, you’d be looking at around 20 lbs to carry in the winter. The dimensions of the pot are 18 inches wide, and about 12 inches high. To find out more information concerning this copper garden hose pot click on the following link: (more…)